Observations on the swelling characteristics of the zwitterionic hydrogel of poly(1-3-sulfopropyl)-2-vinyl-pyridinium-betaine hydrogel

Samples of poly[1-(3-sulfopropyl)-2-vinyl-pyridinium-betaine] (PSPV) have been synthesized to high conversion by free radical polymerization in aqueous solution of the zwitterionic monomer SPV with several concentrations of the crosslinker N,N′-methylene-bis-acrylamide (MBA). The densities of the resultant xerogels increased regularly with the content of MBA. Hydrogels obtained by swelling them in water and aqueous KSCN solution were examined by gravimetric and dimensional analysis. The water contents increased with decreasing content of MBA, the value of 92.7 wt% at the lowest MBA content being higher than that for other zwitterionic hydrogels. Enhanced swelling occurred in 1 M aq. KSCN at each MBA content, the total swelling being 98.1 wt% at the lowest crosslinker content. Swelling increased with increasing temperature. An approximate procedure to formulating swelling equilibrium in term of the volume fraction of water in hydrogel, in conjunction with the van’t Hoff equation, yields a small positive value for the enthalpy of swelling. This is compared with values derived similarly for other hydrogels.     

An efficient synthesis of novel spiro[[8H]indeno[2,1-b]-thiophene-8,9′-fluorene] building block for blue light-emitting materials

We have developed efficient synthetic routes to obtain a novel building block spiro[[8H]indeno[2,1-b]thiophene-8,9′-fluorene] (SITF), a monothiophene-containing spirobifluorene analogue, and constructed blue light-emitting materials, including 2′,7′-bis([1,1′-biphenyl]-4-yl)-spiro[indeno[2,1-b]thiophene-8,9′-fluorene] (BBP-SITF) and 2′,7′-bis(9,9′-spirobifluoren-2-yl)spiro[[8H]indeno[2,1-b]-thiophene-8,9′-fluorene] (BSBF-SITF). BSBF-SITF has shown to be a stable blue light-emitting material with high PL quantum efficiency (89%) and unique regioselective feature at the C2 of thiophene, which indicate that BSBF-SITF will be useful for constructing complicated optoelectronic systems.     

Direct Synthesis, Crystal Structure and Thermal Kinetics of Supramolecular Complex [Co（H2O）6]·（Hnip）2·（H2nip）2·（DMA）2·（H2O）8 （nip=5-nitroisophthalate, DMA=CH3NHCH3）

The crystal of [Co（H2O）6]·（Hnip）2·（H2nip）2·（OMA）2·（H2O）8 has been cultured using direct method and characterized by X-ray single crystal diffractometry, elemental analysis and FTIR spectroscopy. It crystallizes in triclinic system, P-1 space group with the cell parameters of a=0.7012（1） nm, b=1.1378（2） nm, c=1.6612（3） nm, α= 84.92（3）°, β=85.19（3）°, γ=85.91（3）°, V= 1.3128（5） nm^3, Z=1, Dc= 1.573 g·cm^-3. Final R indices [1〉2σ（I）] are： R1 =0.0279, wR2=0.0765 while R indices for all data are： R1 =0.0327, wR2=0.0806. The Co coordination octahadra are each surrounded by two Hnip, two H2nip, two DMA and eight water molecules that are linked by hydrogen bonds and π-π stacking interactions. Thermal analyses of DSC and TG-DTG have been performed on the complex to predict its thermal decomposition mechanism and determine the most probable kinetic model function using Kissinger, Ozawa, integral and differential methods.     

Extremely facile ring inversion and rearrangement in fluorobicyclo[2.1.0]pentanes

cis-1,2,3,4,5,5-Hexafluorobicyclo[2.1.0]pentane and 1,2,4,5-tetrafluorobicyclo[2.1.0]pentane have been synthesized from hexafluorobenzene. The former hydrofluorocarbon, which exists entirely in the endo configuration, rearranges to cis-1,2,3,3,4,5-hexafluorocyclopentene below room temperature (E_a = 21.9 kcal/mol, log A = 13.4). The latter undergoes degenerate ring inversion with extraordinary ease (ΔG^‡ = 6.8 ± 0.2 kcal/mol at −55 °C). Density functional calculations indicate that significant bonding between the bridgehead carbons is retained in the ring inversion transition state. Analogous calculations predict for hexafluorobicyclo[1.1.0]butane a considerably lower barrier for ring inversion and more 1,3-bonding in the transition state.     

单臂冠醚液晶LB膜的相变研究

研究了两种单臂冠醚液晶及配合物(1, 2及1.Eu^3^+)的LB膜的成膜特性,实验发出它们均可在气-液界面形成单分子膜, 但不易转移, 化合物1在压膜过程中出现一维相变。用CPK模型对成膜分子构型和面积进行估算, 其结果与实验相一致, 并讨论了冠醚液晶结构对LB膜相变的影响。     

Studies on Liquid/liquid Extraction of Copper Ion with Room Temperature Ionic Liquid

Room temperature ionic liquids are regarded as “Green solvents” for their nonvolatile and thermally stable properties. They are employed to replace traditional volatile organic solvents in organic synthesis, solvent extraction, and electrochemistry. In this work, a water immiscible room temperature ionic liquid, 1‐butyl‐3‐methylimidazolium hexafluorophosphate [C₄mim][PF₆], was used as an alternative solvent for liquid/liquid extraction of copper ions. Metal chelators, including dithizone, 8‐hydroxyquinoline, and 1‐(2‐pyridylazo)‐2‐naphthol, were employed to form neutral metal‐chelate complexes with copper ions so that copper ions were extracted from aqueous solution into [C₄mim][PF₆]. The parameters that affect the extraction of copper ions with this biphasic system were investigated. The extraction behavior in this novel biphasic system is shown to be consistent with that of traditional solvents. For example, the extraction with this biphasic system is strongly pH dependent. So, the extraction efficiency of coppers ion from an aqueous phase can be manipulated by tailoring the pH value of the extraction system. Hence, the extraction, separation and preconcentraction of copper ions can be accomplished by controlling the pH value of the extraction system. It appears that the use of ionic liquid as an alternate solvent system in liquid/liquid extraction of copper ions is very promising.     

An annulene-fused cyclopentadienide. A photochromic cyclopentadienodimethyldihydropyrene where the fused cyclopentadienide group resembles benzene in its effect on the dihydropyrene-metacyclophanediene valence isomerization

The synthesis of the green cyclopentadiene-fused dimethyldihydropyrene 12 was achieved in 36% yield in 7 steps from the parent dihydropyrene 3. Reaction of 12 with KH or LiCH(2)SiMe(3) gave the [14]annulene-fused cyclopentadienide anion quantitatively. In the (1)H NMR spectra, the internal methyl protons of 12 at delta -3.9, change dramatically on formation of anion 5, becoming deshielded to delta -1.82. This is caused by the reduction in diatropicity of the [14]annulene ring on fusion to the 6pi-cyclopentadienide ring. The anion is also a photochromic switch. Irradiation of the closed form 5 with visible light opens it to the open form 5', which reverts to the closed form 5 either with UV light or thermally. The switching behavior is between that of the parent 3/3' and the benzannelated system 4/4' and suggests that in its effect on the photoswitching, cyclopentadienide is behaving chemically similar to benzene.     

Anion and Additive Effects on the Structure of Mercury(II) Halides Complexes with Tripodal Ligand

The metal complexes [Hg₂(tbim)₂Br₄]·2DMF ( 1 ) and [Hg₂(tbim)I₄]·1.5DMF ( 2 ) were prepared by reactions of 1,3,5‐tris(benzimidazol‐1‐ylmethyl)‐2,4,6‐trimethylbenzene (tbim) with HgBr₂, HgI₂, respectively, and [Hg₂(tbim)I₄]·0.5(FeCp₂)·H₂O ( 3 ) was obtained by the same method with addition of ferrocene (FeCp₂) as additive. Their structures were determined by X‐ray crystallographic analyses. Complex 1 has a macrocyclic binuclear structure with one benzimidazole arm of the ligand free of coordination and the binuclear units are further connected by C‐H···N hydrogen bonds to give an infinite zigzag chain. Complexes 2 and 3 have a 2D network structure in which tbim serves as a tridentate ligand. The results showed that the halides of bromide and iodide have remarkable impact on the structure of the complexes. The FeCp₂ molecules are trapped in the voids of framework 3 .     

Hydrogenation of nitrobenzenes catalyzed by platinum nanoparticle core-polyaryl ether trisacetic acid ammonium chloride dendrimer shell nanocomposite

Platinum nanoparticle core-polyaryl ether trisacetic acid ammonium chloride dendrimer shell nanocomposites (Pt@G_n-NACl) were prepared and used as catalysts for hydrogenation of nitrobenzenes to anilines with molecular hydrogen under mild conditions. The as-prepared nanoparticles have mean particle size from 2.0 to 5.5 nm, depending on the molar ratio of the metal and the dendrimer. The Pt nanoparticles demonstrate near-monodisperse when the molar ratio of Pt and G₃-NACl is below 30. The interaction among three carboxyl groups terminated at the dendron and the metallic core keeps the Pt nanoparticles from agglomerating. The colloidal solution of Pt nanoparticles stabilized by the dendrimer, in which the molar ratio of Pt/G₃-NACl was less than 60, is stable without precipitation for several weeks. The dendrons attach to the metal core radially, and a substantial fraction of the surface of the metal nanoparticle is unpassivated and available for catalytic reactions. Turnover frequencies for the hydrogenation of nitrobenzenes to anilines change from 353 to 49 h⁻¹ depending on the dendrimer generation and substrates. The dendrimer catalysts are stable during the catalytic hydrogenation process and can be recovered by centrifugation and reused. The results suggest the effectiveness of polyaryl ether trisacetic acid ammonium chloride dendrimer as a stabilizer for the preparation of Pt nanoparticle catalysts.     

在线质谱仪在车内VOCs现场快速监测中的应用

挥发性有机物(VOCs)影响车内空气质量和驾乘者的身心健康。自主研发的在线挥发性有机物质谱仪(SPI-MS 2000),实现了有机物分子的单光子电离,产生无碎片的分子离子,可实现秒级响应,仪器的质量分辨率优于800 FWHM,质量精度优于0.02 amu,对甲苯的测定限优于3μg/m^3,且在3~8000μg/m^3范围内有良好的线性关系。将该仪器应用于某客车车内空气的在线检测:在5 s内检测到20多种微克~毫克每立方米量级的有机物。该仪器在车内VOCs现场快速监测方面有广泛的应用前景。